SCHENKER DTR 17 / XMG ULTRA 17, U716, U717 ULTIMATE Gaming Laptops: Arbeitsspeicher / RAM


Turn the notebook over and carefully lay on it’s lid Undo all the screws holding down the CPU and the HDD cover When reassembling, please pay special attention, to screws with different thread lengths, they must go to back in their original position Always disconnect the battery from the device before carrying out any work When a module is installed please always ensure the notch on the side of the module is held in place by the retaining clips Insert the module at a 45 degree angle and gently press downwards until the retaining clamps engage Remove the marked keyboard screws Carefully use a thin tool to push through the screw holes The keyboard will then be removed from its catches Carefully push the clips on the mainboard approx 2mm backwards and loosen the flat ribbon cables To remove a module, carefully press the retaining clips outwards and gently pull the module out When re-installing the keyboard make sure that the flat ribbon cables are connected and that the clips are tightly closed When reassembling, please pay special attention,
to screws with different thread lengths, they must go to back in their original position

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2019 Explore Mellieha. All rights reserved.